This module is used to control the motor of blinds, rollers, shades, garage doors, gates, venetian blinds, etc

NETIChome shutter
NETIChome double on/off switching module

The most simplified installation

The extremely small size and special designed casing ensure the most simplified installation (ease of cabling fixing) inside a flush mounting box. Proved and tested by professional electricians.

1. Remove the switch from the flush mounting box and disconnect the wires from the switch.
2. Connect the wires to the shutter module and insert the module back into the box.
3. Put back the switch into the flush mounting box.

4 simple steps will get you started with the shutter

1. Connect the NETIC main unit to the power grid and the Internet
2. Include the shutter module into your wireless NETIChome network
3. Name the included shutter module using the NETIC web interface
4. Control the shutter from anywhere using either your Android phoneiPhone or your computer

The smallest module

The major part of the modules is only 7 mm high

NETIChome shutter module with dimensions

-10 ° C

Extended operating temperatures from -10 to 40˚C.

Reduce energy consumption & decrease your electricity costs and contribute to the greener environment

Extremely low own energy consumption, less than 0,4W.

Module is measuring the power consumption of the connected electrical motor in Watts and total power consumption in kWh. The power consumption data can be easily collected and aggregated without any additional costs.

Energy consumption
NETIChome shutter

Additional functions make your home even more connected

The module can be used as an extension for control the heating/cooling system. The module has the option to connect a digital temperature sensor.

Top quality and long durability

We believe that products should be made to last, therefor we have selected only top quality electronic components to, e.g. OMRON relays due to its proven quality and durability.

Safety test of temperature rise, construction requirements, insulation resistance and electric strength, overload test according to EN 60669-2-1 standard done by an independent institute (SIQ – Slovenian Institute of Quality and Metrology).

Top quality

Avoid disruptive wiring by using wireless technology

When using the shutter module you will not need to use any wiring to integrate the shutter module into your home automation network. Instead the shutter module uses a low power, secured wireless technology to communicate with your home automation network making the shutter module blend into your home.

The shutter module can be used as repeater to increase your smart home network range

The shutter module works an a transceiver which means that it can both transmit and receive Z-Wave radio signals giving extra functionality to the module. The module will receive weakened signals from surrounding Z-Wave modules and retransmit these with full signal strength, routing the signal around obstacles and so called radio dead spots.


Become a NETIChome partner

We are always looking for new distributors, if you want to become a NETIChome partner then go to our partner page to find out more about a NETIChome parnership.

  • I understand and agree with NETIChome Privacy Policy
  • I opt-in to receive the latest news from NETIChome.

  • I understand and agree with NETIChome Privacy Policy
  • I opt-in to receive the latest news from NETIChome.