1. Connect the NETIC main unit to the power grid and the Internet
2. Include the on/off thermostat module into your wireless NETIChome network
3. Name the included on/off thermostat module using the NETIC web interface
4. Control the on/off thermostat from anywhere using either your Android phone, iPhone or your computer
Installation of the module is carried out in two parts. The first consist of mounting the module inside a mounting box, which is really simple due to the extremely small size and special designed casing (ease of cabling fixing). Proved and tested by professional electricians. Temperature sensor can be installed inside temperature sensor casing (find here more about temperature sensor casings) or according to user needs (inside the tube of the water boiler for temperature sensor, on the water pipe, …)
Temperature sensor measures temperature from -50.0°C to +125.0°C, with a 0.1°C resolution.
As it is connected directly to either 230VAC or 24VDC, no batteries are required.
There is no need to have big room thermostat on the wall, because the temperature set point is set through your NETIChome wireless network.
The Z-Wave module can be used to directly control an electrical or water floor heating system, electric water heater, hot water pump, electrical radiator, etc...
Extremely low own energy consumption, less than 0,4W.
Module is measuring the power consumption of the connected electrical device in Watts and total consumption in kWh. The power consumption data can be easily collected and agregated without any additional costs.
We believe that products should be made to last, therefore we have selected only top quality electronic components to, e.g. OMRON relay due to its proven quality and durability. Safety test of temperature rise, construction requirements, insulation resistance and electric strength, overload test according to EN 60669-2-1 standard done by an independent institute (SIQ – Slovenian Institute of Quality and Metrology).
When using the module you will not need to use any wiring to integrate the module into your home automation network. Instead the module uses a low power, secured wireless technology to communicate with your home automation network making the module blend into your home.
The thermostat works an a transceiver which means that it can both transmit and receive Z-Wave radio signals giving extra functionality to the module. The module will receive weakened signals from surrounding Z-Wave modules and retransmit these with full signal strength, routing the signal around obstacles and so called radio dead spots.
You can change the way the thermostat module is displayed with in the NETIChome for your browser interface by changing the thermostat module icon and the widget title, giving you an interface that fits your home environment.